DISCLAIMER
The block and texture images are intended for indicative purposes only and actual textures and shades may vary between manufacturing locations. Please contact your regional sales office for further information and sample blocks. We advise the construction of sample panels on site as masonry appearance cannot be appreciated from individual blocks.
Airtec Foundation 215mm
Description:
Our 215mm Airtec Foundation blocks are designed as a lightweight, easy to lay, speedy and cost-effective alternative to traditional cavity foundation walls. The 215mm height block is offered as an alternative to our 140mm high type for builders wishing to use conventional coursing height blocks. Hand-holds are also provided at the ends of the blocks for easier, safe manual handling.
A solid Airtec Foundation wall means a faster build, shallower trenches, less waste material, no need for wall ties, less mortar and zero chance of collapsed cavities. The excellent thermal properties of these lightweight Airtec Foundation blocks enhance thermal integrity throughout the build especially if used in conjunction with Airtec walls and floors blocks.
All Airtec products are BBA certified, ISO 9001 Quality, ISO 14001 Environmentally and BES 6001 Responsible Sourcing certified.
In common with all other Airtec blocks, these lightweight large concrete blocks offer the very best possible dimensional tolerance category of 'Thin Layer Mortar B' (TLMB) but are perfectly suitable for conventional 10mm mortar joint construction.
Applications:
- Solid foundation walls below damp-proof course (DPC).
- External solid walls above damp-proof course (DPC).
- Support for cavity, solid, masonry and timber frame walls.
- Support for block & beam suspended floors.
Key Advantages:
- ISO 9001 & ISO 14001 Certified
- BES 6001 Responsible Sourcing certified.
- Manufactured to BS EN 771-4.
- BBA Certified, Category 1 Manufactured.
- Low Weight.
- Exceptional thermal performance.
- Cost-effective solution.
- Safer handling
- Easy to cut
- 100% recyclable, inert and non-hazardous at the end of use
UKCA Certifications:
Documents:
300mm
300mm
- A range of a wagon sizes are available, with or without pallets. Ring your local Sales office for further details.
- Block weight is at the equilibrium moisture content of 3% by weight
- Pack weight allows for maximum moisture content when packed, actual delivered weight will be less
- m² per pack figure based on the inclusion of conventional 10mm mortar joints
- Health & Safety guidelines recommend that precautions be taken when using blocks over 20kg in weight.
