DISCLAIMER
The block and texture images are intended for indicative purposes only and actual textures and shades may vary between manufacturing locations. Please contact your regional sales office for further information and sample blocks. We advise the construction of sample panels on site as masonry appearance cannot be appreciated from individual blocks.
Armstart
Description:
Widely used by major housebuilders, Armstart offers an efficient, simple and cost-effective method of block construction below damp proofing course (DPC) saving on labour and mortar.
Manufactured in a range of width / length combinations, these Medium Density Foundation Blocks are a faster, simpler and safer method when compared to constructing cavity foundation walls. No wall ties are required, no cavity filling and no danger of collapsed cavities. Resulting in faster build rates, less mortar and less repetitive manual handling. Weighing less than 20kg, these lightweight concrete blocks contain a significant proportion of recycled and reclaimed raw material.
Our Armstart Foundation blocks are manufactured to BS EN 771-3 and are ISO 9001 Quality Assured, ISO 14001 Environmentally Certified and hold BES 6001 Responsible Sourcing certification.
Applications:
- Solid foundation walls from 250mm-350mm thick to suit cavity widths of 75mm-150mm.
- Solid foundation walls below damp-proof course (DPC).
- Suitable for soil conditions up to DS-3 as defined in BRE Special Digest
- A range of strengths available to suit both low and high-rise buildings.
- Each block offers 2 alternative widths.
Key Advantages:
- Below 20kg in weight to comply with HSE and CDM guidelines on repetitive manual handling safety.
- A simple and safer alternative to cavity foundation wall; no wall ties required, cavity filling or danger of collapsed cavities, faster build rates, less mortar and repetitive manual handling required.
- 100% recyclable, inert and non-hazardous at the end of use
UKCA Certifications:
Documents:
350mm x 215mm
350mm x 250mm
There are two sets of values for some products due to our pack sizes varying at different manufacturing locations. Please check details with your nearest sales office. Block weights quoted are approximate and include the typical additional weight from the natural moisture content although this can vary slightly.
The m² figures include the conventional 10mm mortar joint.
Pack size quantities may vary between manufacturing locations. Always check details with your nearest sales office.
